Extreme Series Precision Gear Pump

The Extreme Series gear pump is designed for high stress loads. It can easily pump difficult fluids from pigmented inks to strawberry smoothies.

Characteristics:

  • Flow Range 100 to 5000 ml/min
  • Chemically Resistant
  • Low Pressure Pulsation
  • Fluid Viscosity Range 0.3 to 1000 cps
  • Flexible Inlet and Outlet Port Locations
  • 3D Mounting
  • Magnetically Coupled (No Shaft Seals)
  • Robust
  • Hermetically sealed
  • Long service life
  • Low maintenance

Versions:

  • Available with either BLDC or with DC motors
  • Flow range 1000, 2000, 3000, and 4000 ml/min

Precision

Star icon Star icon Star icon Star icon Star icon

The Extreme Series precision gear pump is designed for high stress loads. It can easily pump difficult fluids from pigmented inks to strawberry smoothies. With a flow rate of between 1,500 and 5,000 milliliters per minute we recommend its use in a variety of applications such as in dialysis monitors, beverage dispensing, or continuous inkjet printing equipment.

Despite being subjected to heavy demands, the Extreme Series features a long service life.

It is equipped with additional bearings and the load capacity of the conventional magnetic coupling design tweaked to higher limits. With its forged pump body, it provides a wide selection of connection options.

As an additional option, it can be equipped with hardened gears for tasks that are especially demanding. The Extreme Series pumps are available with either BLDC or with DC motors. An optional internal pressure relief valve provides additional over pressurization protection. The brush-less DC motor includes current limiting and thermal over-protection, and its IP-55 rating means reliable operation in harsh environments at peak performance.

Benefits

Benefit Icon

3D Mounting

Our pumps are extremely versatile when it comes to mounting. The body is compact in size and the flexible inlet and outlet port locations simplify plumbing and conserve valuable space.

Benefit Icon

Long-life

DPP pumps are all characterized by their robustness and performance. Wear and tear is at its lowest, and their smart designs ensure a sustainable reduction in operating costs.

Benefit Icon

100% Outgoing Testing

Before any pump leaves our factory, it is stringently and extensively tested in accordance with its specifications. Our customers receive detailed reports, saving them time and money.

Benefit Icon

Chemically Resistant

Our pumps are made from materials that are resistant to a wide range of aggressive chemicals. This means our pumps can also operate reliably and precisely in even the harshest environments.

Benefit Icon

Low Pressure Pulsation

Thanks to their smart drives and the innovative helical gear design our pumps ensure an extremely smooth fluid delivery with almost no pressure pulsation.

Benefit Icon

No Shaft Seals

DPP gear pumps are hermetically sealed instead of using conventional shaft seals. This means low maintenance for you and your customers, a long service life and the highest degree of productivity.

Specifications

Performance

  • Max. continuous pressure: 4 bar
  • Max. intermittent pressure: 6 bar
  • Max. static case pressure: 20 bar
  • Inlet: Self-priming
  • Speed range: 0-4500 rpm
  • Fluid viscosity range: 0.3 to 1000 cps

Electrical

  • Supply voltage: 24 vdc
  • Speed control: 0-5 vdc
  • Tach. Output: 6V square wave, 2 pulses per revolution
  • Rotation: Bi and Uni-directional
  • Max. current: 2 amps
  • Max. output power: 35 Watts
  • Current Overload Protection: 2 amps
  • 4-conductor Teflon cable: 24 AWG
  • Color code: Black = ground, Red = +24 vdc, Green = Tach. Output, White = 0-5 vdc speed

Temperature

  • Fluid temperature range: -20 to +100°C
  • Ambient air temp. range: 0-60°C
  • Thermal protection: Internal thermal sensor off at 90°C, resets at 80°C
  • Thermal protection: Internal thermal sensor off at 90°C, resets at 80°C
  • Relative humidity range: 0-95% non-condensing

Construction

  • Configurations: 316L stainless steel, PEEK®, EPDM, Alloy-C, PPS (gears), Teflon®, Silicone, Viton®, Kalrez®
  • Inlet/Outlet Configurations: 1/8“-NPT (standard), 1/4“-NPT, G1/8, G1/4, exiting the side, top, or end of the pump
  • Internal pressure relief valve: Optional
  • Marking: Permanent laser-mark identification for 100% traceability
  • Mass: 1.3 – 1.6 kg

Pump Resources and Datasheets

Please use the links below to request access to the product datasheets and 3D STEP files.


Other Precision Gear Pumps

Build a Custom Pump to Your Specific Requirements

Our engineers and technical experts are eager to design a pump to your requirements.

DPP Extreme Series Micro Gear Pump 2000 DC